Page 7 - Precision-2.0Li-OP-Manual-7-Languages
P. 7

English



                   P50X006  1. Vacuum Head (Brushes)               LC099-3S-US-EU  9. Battery Charger & EU Adapter
                           2. Brushes                                              10. Spring Clip
                           3. Wheels                                  LB003S2P-C   11. Battery Pack
                  P50X006G  4. Vacuum Head                       PROA003 / P40X003  12. Motor Box Assembly with Cap
          PROA200 / P41X200  5. Universal Vac Head Adapter              P50022SS   13. Sand and Silt Bag
                   P50X002  6. Nose Cap                                 P50022AP   14. All Purpose Filter Bag
                  P50022XF  7. Multi Layer filter bag                              15. Shoulder Strap
                           8. Shell                                   LC099-3S-CR  16. Car Charger


     Specifications
     Battery charger Input.........................................................................110-240V-50/60HZ, 0.3A Maximum  ADDITIONAL PARTS AVAILABLE:
     Battery charger Output.......................................................................................................12.6V,        1.A  Head and Hose Attachment (part No: P30X882)
     Water temperature range................................................... Maximum 96°F, (35°C) Minimum 40°F, (5°C)   To purchase, contact your retailer or call us at (732)-967-9888
     Operation Depth........................................................... Maximum 12 ft. (3.5 m), Minimum 10 in., 0.25 m
                   Only use the battery charger supplied with the cleaner.



      A Charging Your Cleaner                              E Attaching the Pool Pole

     Initial Charge 4 Hours                                F Turning the Cleaner On and Off
     Recharging (After Complete Discharge) 4 Hours

                                                           G Maintenance
      B Adding the Brushes

     C Filter Assembly                                    Long Term Storage

                                                          Remove the Battery Pack from the cleaner before storage.
     D Attaching the Vacuum Head                          Always clean the Nose Cap and Filter Bag before storing.

                                                          Always store and charge your cleaner in a cool, dry indoor shelter.
     (Figure D.1 without adapter)
     (Figure D.2 with adapter)                            Recharge the cleaner for 4 hours after each month of inactivity.



    Brushes                                               Cleaning the Filter Bag
    Brushes are added to the vacuum head.                 You should remove and clean the Filter Bag following each use.
    (Figure B)                                            (Figure G.1)

    Different configurations are available. (6 Brushes Total)  Don’t scrub the bag against itself while rinsing it. (Figure G.2)




























                                                             6
   2   3   4   5   6   7   8   9   10   11   12